Franco Califano Forum
Franco Califano Forum
Home | Profilo | Registra | Argomenti Attivi | Membri | Cerca | Aiuto
Nome Utente:
Password:
Salva Password
Dimenticato la tua Password?
 
 Tutti i Forums
 La segreteria virtuale dei visitatori
 Cable Identification Instrument
 Nuovo Argomento  Rispondi all'Argomento
 Finestra di stampa
 
Autore Argomento precedente Argomento Argomento successivo  
whgdmk1234
Advanced Member

China
1513 Messaggi
Inviato il 31/01/2023 :  02:48:20  Visualizza profilo  Rispondi includendo il Messaggio originale
https://www.mktester.com/cable-fault-locator/cable-identification-instrument.htmlOverview:

Cable Identification instrument is designed to identify a special one within a group of cables during the power cable’s setting up moving maintaining and faults processing. It’s suitable for all kinds of HV & LV cables.The cable identification instrument is a special instrument developed according to the needs of the electric power industry. The cable identification instrument is used to identify a specific cable in a bundle of cables in the erection, migration, maintenance and fault handling of power cables; it has the ability to identify the cable accurately (double identification of direction and amplitude), fast, simple operation, and application Features such as wide range.

The cable identification instrument is composed of a signal generator, a receiving identification clamp and an indicator meter. The signal generator mainly generates a special pulse modulation signal, which is added to the stopped cable to be tested through the output line, and the receiving clamp is used to find the tested cable on site. For cables, when the receiving clamp detector detects a special signal applied to the cable, the meter pointer on the signal detector swings synchronously with the frequency of the applied signal. When the signal detector is used to identify the clamp signal detector, the detected signals on other cables are much smaller. And the direction is opposite, the amplitude and direction are indicated by the meter, it is easy to determine the cable under test.

Transmitter:

Max. pulse peak value output current: 20A

Pulse repetition rate: 1 time/2 seconds.

Power supply: AC220V(±10%),Power:100W

Weight: 8kG

Receiver:

Sensitivity: 40dB

Power supply: 2 X 5# batteries

Weight: 0.2kG

   
 Nuovo Argomento  Rispondi all'Argomento
 Finestra di stampa
Vai a:

Franco Califano Forum

© 2002 Franco Califano Fans Club

Vai in alto

Traduzione in Italiano: AlpiWeb Network Solutions