https://www.mktester.com/transformer-tester/partial-discharge-detector/handheld-partial-discharge-tester.htmlProduct description:Handheld partial discharge tester is a detection device for diagnosing power line faults and hidden troubles by collecting abnormal ultrasonic signal in power lines and then through software analysis. It can judge hidden fault position and fault type without power cut. The device collect abnormal ultrasonic signal by ultrasonic detector (ultrasonic sensor) , then transmit the signals to the host, diagnose the fault and hidden trouble type and severity level, and convert to audible sound signal and the output waveform. It can help inspectors accurately find out faults and hidden dangers, prevent malignant faults happening, avoid unnecessary power cut, increase the reliability of power supply, Improve the efficiency of inspection personnel, and reduce the labor intensity of inspection personnel.
Technical index:
System
WINCE6.0
CPU
Main frequency of 533MHz
Memory
RAM of 256MB DDR2, 1GB NandFlash
Screen
TFT true color touch screen of 4.3” ,resolution of 480 * 272
Interface
SD memory card,USB,serial port,earphones
SD memory card
TF card of more than 8G
Camera
3 mega-pixel high definition camera
Accessories
GPS,temperature /humidity measurement device,high brightness laser pointer
Storage function
GPS coordinate,time/date,temperature/humidity
Frequency range
20—150kHz
Sensor
40kHz x 1Ea
Working condition
-25℃ ~ 70℃
Relative humidity
0 - 95%
Charger specification
Input :100-240V, 50/60Hz
Output :voltage of 20V, current of 3.25A
Power supply
Battery power:lithium battery
Working hours:about 8 hours
Battery protection:LCD backlight will go dark, when there
is no operation within 5 minutes. The instrument will
automatically shutdown, when there is no operation within 20 minutes. When the battery power is less than 5%, system will beep hinting users to save data timely, then users need power it off and recharge.