https://www.mktester.com/relay-protection-tester/digital-three-phase-shifter.htmlOverview:The digital three-phase shifter is a portable electrical tester composed of transformer phase shifter, digital phase display, voltage current digital display, output voltage adjustment, coarse adjustment, fine adjustment, and power supply, etc. The digital three-phase shifter combines the transformer phase phase technology with digital measurement techniques, which can be adjusted at any angle in the range of 0 to 360 °, which has high precision, reading. Accurate intuitive, the voltage output is adjustable, the digital three-phase shifter structural components use independent fixtures, firm and reliable, full seals, easy to carry in the field and on-site use.
Technical parameter:
Input voltage Three-phase four-wire 3 × 380 (220) V 50Hz
The output voltage Three-phase four-wire 3 × (0 ~ 380) / (0 ~ 220) Triple semi-digital display, accuracy: level 1
Output current Communication 0 ~ 20A Triple semi-digital display, accuracy: level 1
Maximum output capacity 3×300VA
Three-phase coarse Ambient temperature: 0 ° ~ 360 ° Move 30 ° per step
Three-phase fine -3°~18°,12°~33° Four digits display, accuracy level 1.0
Voltage fluctuation Rough adjustment: ≤1.5% Detonometer: ≤ 2.0%
Waveform distortion Output waveform distortion ≤ input waveform distortion
Hestledge <60 ℃
Insulation resistance ≥22MΩ
Pressure test 1.5kV/min
Use environment Temperature: -10 ° C ~ 40 ° C Humidity: <80%
Dimensions (length × width × height) 480×360×230mm3
weight About 35kg
Function:
1. The digital three-phase shifter can reach an advance or hysteresis shift phase of any angle within 0 to 360 degrees;
2. The digital three-phase shifter uses three-phase three-core column transformer, Y0 wiring method, each with four equilateral windings, intersecting different angles, forming a hexagon connected to the corner, The six sides have a total of twelve taps, namely the twelve gears, 30 degrees per gear, three-phase synchronous adjustment, fine adjustment consists of three coaxial autographs and capacitors, so that the output three-phase is in the range of 0 ~ 360 degrees. Synchronous adjustment to ensure the balance of the three-phase output;
3. The digital three-phase shifter has the characteristics of convenient operation, small size, low noise, and good output waveform. It can meet the single-phase and three-phase AC power, phase and other instrumentation test verification, and the test verification of the meter, etc. Among the calibration devices for the electric meter.